WeChat Mini Program
Product Classification
J36 series straight-side two point press
Main Structure Features:
Detachable steel welded frame with high rigidity, welded crown,column and bed are pretightened with tie rod bolt, transition connected by adopting guide pillar and bush between crown and slider
It has eccentric gear spindle structure, which has large slider stroke and strong carryng capacity
Eeight-face rectangle guide of slide ensures running accuracy
Part revolusion pneumatic friction clutch and brake , with large braking torque, long service life, low noise and convenient for maintenance
Hydraulic overload protection device and overload automatic emergency stop, protect press and mold safety
Automatic oil lubricating system, functioning of oil circuit alarm
PLC electrical centralized control, functioning of emergency stop,fine adjustment, single and continuous operational action.
Die height is adjusted electrically, which is shown in digits
Optional:tonnage,die holding device ,buffer and air cushion (air cushion stroke adjustable and closing function can be added)
J36 series straight-side two point press
Main Structure Features:
Detachable steel welded frame with high rigidity, welded crown,column and bed are pretightened with tie rod bolt, transition connected by adopting guide pillar and bush between crown and slider
It has eccentric gear spindle structure, which has large slider stroke and strong carryng capacity
Eeight-face rectangle guide of slide ensures running accuracy
Part revolusion pneumatic friction clutch and brake , with large braking torque, long service life, low noise and convenient for maintenance
Hydraulic overload protection device and overload automatic emergency stop, protect press and mold safety
Automatic oil lubricating system, functioning of oil circuit alarm
PLC electrical centralized control, functioning of emergency stop,fine adjustment, single and continuous operational action.
Die height is adjusted electrically, which is shown in digits
Optional:tonnage,die holding device ,buffer and air cushion (air cushion stroke adjustable and closing function can be added)
|
Type Specification |
JH36-250 | JH36-250D | JH36-250F | JH36-250G | JH36-250H | JH36-250L | JH36-250M | JM36-250 | J36-400 | |
|---|---|---|---|---|---|---|---|---|---|---|
|
Nominal pressure(KN) |
2500 | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 | 4000 | |
|
Nominal pressure stroke(mm) |
13 | 11 | 11 | 11 | 11 | 11 | 11 | 9 | 13 | |
|
Slide stroke(mm) |
300 | 400 | 400 | 400 | 400 | 400 | 400 | 300 | 600 | |
|
Strokes of slide(spm) |
16-30 | 17 | 17 | 17 | 11-18 | 17 | 17 | 20-40 | 10-16 | |
|
Trimming strokes(spm) |
/ | / | / | / | / | / | / | 3-5 | / | |
|
Max. die height(mm) |
700 | 600 | 500（700） | 700 | 800 | 700 | 900 | 700 | 1200 | |
|
Die height adjustment(mm) |
350 | 250 | 250 | 350 | 350 | 350 | 350 | 250 | 500 | |
|
Distance between gilbs(mm) |
2614 | 2560 | 2560 | 2846 | 2630 | 2646 | 2924 | 2690 | 4190 | |
|
Side opening area(mm) |
W | 590 | / | 400 | 400 | 400 | 400 | 1100 | 1500 | 2000 |
| H | 395 | / | 270 | 300 | 350 | 300 | ||||
|
Slide area(mm) |
F.B | 1250 | 1250 | 1250 | 1300 | 1300 | 1350 | 1500 | 1300 | 1800 |
| L.R | 2690 | 2560 | 2710 | 2960 | 2800 | 2760 | 3000 | 2500 | 4000 | |
|
Bolster area(mm) |
Qty(Piece) | / | 3 | Single crown | Single crown | Single crown | Single crown | Single crown | ||
|
Capacity(KN) |
/ | 65*3 | 400 | 436 | 400 | 436 | 436 | / | 800 | |
|
Srtoke(mm) |
/ | 200 | 200 | 200 | 200 | 200 | 200 | / | 15-250 | |
|
Move mode of the bolster |
Forward |
fixed |
fixed |
fixed |
Forward |
fixed |
fixed |
Forward |
R |
|
|
Main motor power(KW) |
45 | 30 | 30 | 30 | 37 | 30 | 30 | 37 | 55 | |
|
Electrical control |
PLC | PLC | PLC | PLC | PLC | PLC | PLC | PLC | PLC | |
|
Shape of air clutch |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
|
|
Lubrication |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
|
| Overal dimensions(mm) | F.B | 3400 | 2320 | 2320 | 2320 | 2150 | 2320 | 2810 | 4370 | 5300 |
| L.R | 4660 | 4490 | 4490 | 4980 | 4790 | 4970 | 5265 | 5200 | 6980 | |
|
Height above floor(mm) |
5800 | 5200 | 5370 | 5370 | 5900 | 5360 | 5610 | 5980 | 8250 | |
|
Remark |
Two column | Two column | Two column | Two column | Two column | Two column | Four column | Four column | Four column | |
|
Type Specification |
JA36-400 | JB36-400 | JC36-400B | JC36-400C | JD36-400A | JD36-400B | JE36-400N |
JH36-400 |
JH36-400D | |
|---|---|---|---|---|---|---|---|---|---|---|
|
Nominal pressure(KN) |
4000 | 4000 | 4000 | 4000 | 4000 | 4000 | 4000 | 4000 | 4000 | |
|
Nominal pressure stroke(mm) |
13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | |
|
Slide stroke(mm) |
600 | 500 | 400 | 400 | 400 | 400 | 400 | 300 | 400 | |
|
Strokes of slide(spm) |
10-16 | 10-18 | 16 | 16 | 17-30 | 16 | 17 | 16-30 | 16 | |
|
Trimming strokes(spm) |
3-6 | / | / | / | / | / | / | / | / | |
|
Max. die height(mm) |
1200 | 1200 | 750 | 850(750) | 900 | 900 | 850（1000） | 800 | 900(750) | |
|
Die height adjustment(mm) |
600 | 550 | 350 | 350 | 500 | 400 | 400 | 400 | 400 | |
|
Distance between gilbs(mm) |
3690 | 3190 | 2620 | 2850 | 2834 | 3250 | 2654 | 2654 | 2620 | |
|
Side opening area(mm) |
W | 1800 | 1400 | 500 | 500 | 1200 | 1250 | 720 | 910 | 550 |
| H | 500 | 500 | 600 | 600 | 450 | |||||
|
Slide area(mm) |
F.B | 1600 | 1600 | 1400 | 1400 | 1600 | 1800 | 1600 | 1600 | 1600 |
| L.R | 3600 | 2800 | 2790 | 3020 | 2920 | 3200 | 2800 | 2800 | 2780 | |
| TH | 220 | 110 | 170 | 200 | 200 | 200 | 190 | 200 | 200 | |
|
Cushion Optional |
Qty(Piece) |
/ | / | 3 | Single crown | Single crown | Single crown | Single crown | / | Single crown |
|
Capacity(KN) |
/ | / | 65*3 | 730 | 700 | 800 | 600 | / | 600 | |
|
Stroke(mm) |
/ | / | 200 | 200 | 10-200 | 10-150 | 150 | / | 200 | |
|
Move mode of the bolster |
R |
Forward |
fixed |
fixed |
Forward |
Forward |
Forward |
Forward |
fixed |
|
|
Main motor power(KW) |
55 | 55 | 45 | 45 | 55 | 55 | 45 | 55 | 45 | |
|
Electrical control |
PLC | PLC | PLC | PLC | PLC | PLC | PLC | PLC | PLC | |
|
Shape of air clutch |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
|
|
Lubrication |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
|
| Overal dimensions(mm) | F.B | 4900 | 4900 | 2470 | 2400 | 3320 | 3600 | 3570 | 3570 | 2550 |
| L.R | 6380 | 6380 | 4470 | 4710 | 4160 | 5460 | 4670 | 4670 | 4820 | |
|
Height above floor(mm) |
8370 | 7925 | 5600 | 5630 | 6830 | 6750 | 6850 | 6660 | 6250 | |
|
Remark |
Four column | Four column |
Two column |
Two column |
Four column | Four column |
Two column |
Two column |
Two column |
|
|
Type Specification |
JH36-400E | JH36-400F | JH36-400G | JH36-400K | JH36-400L | JH36-400M | JH36-400N | J36-500 | J36-630 | |
|---|---|---|---|---|---|---|---|---|---|---|
|
Nominal pressure(KN) |
4000 | 4000 | 4000 | 4000 | 4000 | 4000 | 4000 | 5000 | 6300 | |
|
Nominal pressure stroke(mm) |
13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | |
|
Slide stroke(mm) |
400 | 400 | 400 | 400 | 400 | 500 | 400 | 650 | 650 | |
|
Strokes of slide(spm) |
16 | 16 | 16 | 12-17 | 12-17 | 12-16 | 17 | 9-13 | 9-13 | |
|
Trimming strokes(spm) |
/ | / | / | / | / | / | / | 3-4 | 3-4 | |
|
Max. die height(mm) |
900(1000) | 900 | 1000 | 1000 | 1000 | 1100 | 800 | 1300 | 1300 | |
|
Die height adjustment(mm) |
400 | 400 | 400 | 400（500） | 500 | 500 | 400 | 700 | 700 | |
|
Distance between gilbs(mm) |
2840 | 3050 | 3300 | 3050 | 3050 | 3500 | 2650 | 4190 | 4190 | |
|
Side opening area(mm) |
W | 550 | 550 | 550 | 550 | 550 | 800 | 710 | 2200 | 2200 |
| H | 450 | 450 | 450 | 530 | 530 | 600 | 590 | |||
|
Slide area(mm) |
F.B | 1400(1600) | 1800 | 1600 | 1600 | 1600 | 1600 | 1600 | 1900 | 1900 |
| L.R | 3000 | 3220 | 3470 | 3200 | 3200 | 3600 | 2800 | 4000 | 4000 | |
|
Bolster area(mm) |
F.B | 1600 | 1800 | 1700 | 1600 | 1600 | 1800 | 1600 | 2000 | 2000 |
| L.R | 3000 | 3200 | 3450 | 3200 | 3200 | 3600 | 2800 | 4000 | 4000 | |
| TH | 200 | 200 | 200 | 190 | 190 | 200 | 190 | 250 | 250 | |
|
Cushion Optional |
Qty(Piece) | Single crown | Single crown | Single crown | Single crown | Single crown | Single crown | / | / | / |
|
Capacity(KN) |
730 | 800 | 800 | 750 | 750 | 800 | / | / | / | |
|
Stroke(mm) |
200 | 200 | 200 | 210 | 210 | 10-240 | / | / | / | |
|
Move mode of the bolster |
fixed |
fixed |
fixed |
Forward |
Forward |
Forward |
Forward |
L |
L |
|
|
Main motor power(KW) |
45 | 45 | 45 | 45 | 45 | 45 | 45 | 55 | 75 | |
|
Electrical control |
PLC | PLC | PLC | PLC | PLC | PLC | PLC | PLC | PLC | |
|
Shape of air clutch |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
|
|
Lubrication |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
|
| Overal dimensions(mm) | F.B | 2560 | 2650 | 2500 | 2540 | 2550 | 2640 | 2550 | 5470 | 5400 |
| L.R | 5040 | 5250 | 5500 | 5340 | 5320 | 5840 | 4640 | 6980 | 6000 | |
|
Height above floor(mm) |
6370 | 6270 | 6370 | 6830 | 6900 | 7370 | 6650 | 8920 | 9050 | |
|
Remark |
Two column |
Two column |
Two column |
Two column |
Two column |
Two column |
Two column |
Four column | Four column | |
|
Type Specification |
J36-630A | JA36-630 | JB36-630 | JD36-630 | JD36-630B | JH36-630B | JH36-630F | JH36-630G | JH36-630M | |
|---|---|---|---|---|---|---|---|---|---|---|
|
Nominal pressure(KN) |
6300 | 6300 | 6300 | 6300 | 6300 | 6300 | 6300 | 6300 | 6300 | |
|
Nominal pressure stroke(mm) |
13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | |
|
Slide stroke(mm) |
600 | 600 | 700 | 500 | 500 | 450 | 500 | 500 | 600 | |
|
Strokes of slide(spm) |
10～16 | 10～16 | 10～18 | 12 | 10～25 | 10～25 | 12 | 8～13 | 8～12 | |
|
Trimming strokes(spm) |
3～6 | 3～6 | 3～6 | / | / | / | / | / | ||
|
Max. die height(mm) |
1200 | 1200 | 1400 | 1000 | 1100 | 1000 | 1200 | 1100 | 1200 | |
|
Die height adjustment(mm) |
500 | 600 | 700 | 400 | 500 | 500 | 500 | 500 | 500 | |
|
Distance between gilbs(mm) |
4190 | 3690 | 3590 | 3550 | 4404 | 3650 | 3510 | 3910 | 3910 | |
|
Side opening area(mm) |
W | 2000 | 2000 | 1600 | 1250 | 1660 | 1100 | 750 | 750 | 820 |
| H | 700 | 520 | 520 | 620 | ||||||
|
Slide area(mm) |
F.B | 1800 | 1800 | 1800 | 1800 | 2000 | 1600 | 1800 | 1800 | 1600 |
| L.R | 4000 | 3600 | 3200 | 3600 | 4200 | 3600 | 3600 | 4000 | 4000 | |
|
Bolster area(mm) |
F.B | 1800 | 1800 | 1800 | 1800 | 2000 | 1600 | 1800 | 1800 | 1800 |
| L.R | 4000 | 3600 | 3200 | 3600 | 4200 | 3600 | 3600 | 4000 | 4000 | |
| TH | 250 | 260 | 260 | 210 | 270 | 210 | 210 | 210 | 210 | |
|
Cushion Optional |
Qty(Piece) | Single crown, locking | Single crown | Single crown | Single crown | Single crown | / | Single crown | Single crown | Single crown |
|
Capacity(KN) |
1200 | 1600 | 1500 | 1000 | 1500 | / | 1000 | 1000 | 1200 | |
|
Stroke(mm) |
15-250 | 15-250 | 15～300 | 200 | 0～250 | / | 240 | 240 | 10～240 | |
|
Move mode of the bolster |
R |
R |
Forward |
Forward |
Forward |
Forward |
Forward |
Forward |
Forward |
|
|
Main motor power(KW) |
90 | 75 | 75 | 75 | 90 | 90 | 75 | 75 | 75 | |
|
Electrical control |
PLC | PLC | PLC | PLC | PLC | PLC | PLC | PLC | PLC | |
|
Shape of air clutch |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
|
|
Lubrication |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
|
| Overal dimensions(mm) | F.B | 5400 | 5200 | 5500 | 3810 | 4230 | 4210 | 2890 | 2845 | 2885 |
| L.R | 6980 | 6490 | 6380 | 5990 | 6870 | 6120 | 6000 | 6670 | 60 | |
|
Height above floor(mm) |
8950 | 8790 | 9270 | 7590 | 7980 | 7700 | 7760 | 7660 | 8130 | |
|
(Remark) |
Four column |
Four column |
Four column |
Four column |
Four column |
Two column |
Two column |
Two column |
Two column |
|
|
type Specification |
JH36-630N | JL36-630A | J36-800 | JA36-800 | JB36-800 | J36-800A | JH36-800 | JH36-800A | JH36-800L | |
|---|---|---|---|---|---|---|---|---|---|---|
|
Nominal pressure(KN) |
6300 | 6300 | 8000 | 8000 | 8000 | 8000 | 8000 | 8000 | 8000 | |
|
Nominal pressure stroke(mm) |
13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | |
|
Slide stroke(mm) |
500 | 300 | 650 | 650 | 700 | 650 | 500 | 500 | 650 | |
|
Strokes of slide(spm) |
12 | 15 | 9-13 | 10～16 | 10～18 | 10～18 | 10 | 16 | Continuous 8-12 | |
|
Trimming strokes(spm) |
/ | / | 3～4 | 3～6 | 3～6 | / | / | / | / | |
|
Max. die height(mm) |
1000 | 700 | 1300 | 1200 | 1400 | 1200 | 990 | 990 | 700 | |
|
Die height adjustment(mm) |
500 | 300 | 700 | 600 | 700 | 600 | 500 | 500 | 300 | |
|
Distance between gilbs(mm) |
3524 | 3030 | 4150 | 3650 | 4350 | 4010 | 4040 | 3870 | 3850 | |
|
Side opening area(mm) |
W | 810 | 1470 | 2200 | 2000 | 1700 | 1110 | 800 | 1000 | 1800 |
| H | 650 | 740 | 700 | 825 | ||||||
|
Slide area(mm) |
F.B | 1700 | 1500 | 1900 | 1800 | 1900 | 1800 | 1800 | 1800 | 1800 |
| L.R | 3600 | 3000 | 4000 | 3600 | 4000 | 4000 | 3990 | 3930 | 3990 | |
|
Bolster area(mm) |
F.B | 1800 | 1600 | 2000 | 1800 | 1900 | 1800 | 1800 | 1800 | 1800 |
| L.R | 3600 | 3000 | 4000 | 3600 | 4000 | 4000 | 4000 | 4000 | 4000 | |
| TH | 210 | 210 | 270 | 280 | 300 | 230 | 210 | 210 | 240 | |
|
Cushion (Optional) |
Qty(Piece) | Single crown | / | / | Single crown | Single crown | / | Single crown | Single crown | Single crown |
|
Capacity(KN) |
1000 | / | / | 2000 | 2000 | / | 1200 | 1500 | 1000 | |
|
Stroke(mm) |
240 | / | / | 15～280 | 15～300 | / | 250 | 240 | 200 | |
|
Move mode of the bolster |
Forward |
fixed |
L |
R |
Forward |
Forward |
Forward |
Forward |
fixed |
|
|
Main motor power(KW) |
75 | 75 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | |
|
Electrical control |
PLC | PLC | PLC | PLC | PLC | PLC | PLC | PLC | PLC | |
|
Shape of air clutch |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
|
|
Lubrication |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
|
| Overal dimensions(mm) | F.B | 3810 | 3020 | 5760 | 5600 | 5750 | 4870 | 3020 | 3790 | 4140 |
| L.R | 6090 | 5500 | 7170 | 6600 | 7280 | 6880 | 6330 | 6620 | 5600 | |
|
Height above floor(mm) |
7560 | 6450 | 8970 | 9090 | 9530 | 9160 | 7860 | 7860 | 7740 | |
|
(Remark) |
Two column |
Two column |
Four column |
Four column |
Four column |
Four column |
Four column |
Four column |
Four column |
|
|
type Specification |
JH36-1000 | J36-1000 | J36-1200 | J36-1250A | J36-1250 | JA36-1250 | J36-1300 | J36-1600 | |
|---|---|---|---|---|---|---|---|---|---|
|
Nominal pressure(KN) |
10000 | 10000 | 12000 | 12500 | 12500 | 12500 | 13000 | 16000 | |
|
Nominal pressure stroke(mm) |
13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | |
|
Slide stroke(mm) |
500 | 700 | 800 | 500 | 650 | 750 | 650 | 700 | |
|
Strokes of slide(spm) |
12 | 10～18 | 10～18 | 12～16 | 9～13 | 10～18 | 10～16 | 10～16 | |
|
Trimming strokes(spm) |
/ | / | 3～6 | / | 3～4 | 3～6 | 3～6 | 3～6 | |
|
Max. die height(mm) |
1200 | 1200 | 1500 | 1350 | 1300 | 1425 | 1200 | 1500 | |
|
Die height adjustment(mm) |
500 | 500 | 800 | 600 | 700 | 750 | 500 | 800 | |
|
Distance between gilbs(mm) |
4120 | 4250 | 4350 | 4950 | 4150 | 3950 | 4150 | 5310 | |
|
Side opening area(mm) |
W | 2200 | 2200 | 1800 | 2000 | 2200 | 1450 | 2200 | 1800 |
| H | |||||||||
|
Slide area(mm) |
F.B | 2000 | 2000 | 2000 | 1800 | 1900 | 2000 | 2000 | 2000 |
| L.R | 4000 | 4000 | 4000 | 4500 | 4000 | 4000 | 4000 | 5000 | |
|
Cushion (Optional) |
Qty(Piece) | Single crown | Single crown | Single crown | Single crown | Single crown | Upper cushion | Single crown, locking | Single crown |
|
Capacity(KN) |
1000 | 2000 | 3000 | 1500 | 1500 | 1200 | 2000 | 3000 | |
|
Stroke(mm) |
240 | 0～250 | 15～300 | 0～250 | 10～300 | 150 | 15～300 | 0～300 | |
|
Move mode of the bolster |
Forward |
Forward |
Forward |
Forward |
L.R |
Forward |
R |
Forward |
|
|
Main motor power(KW) |
110 | 110 | 132 | 132 | 132 | 132 | 132 | 200 | |
|
Electrical control |
PLC | PLC | PLC | PLC | PLC | PLC | PLC | PLC | |
|
Shape of air clutch |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
Spilt type |
|
|
Lubrication |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
Thin oil |
|
| Overal dimensions(mm) | F.B | 5600 | 6000 | 5900 | 5635 | 6080 | 5600 | 6080 | 6000 |
| L.R | 6980 | 7180 | 7280 | 7890 | 7360 | 6880 | 7090 | 8330 | |
|
Height above floor(mm) |
8950 | 9420 | 10610 | 9660 | 9800 | 10690 | 9640 | 10550 | |
|
(Remark) |
Four column |
Four column |
Four column |
Four column |
Four column |
Four column |
Four column |
Four column |
|
